In the 40 years that I have been teaching all styles of guitar to every type of student, there have been a few questions that come up over and over which seem to be the cause of great concern and anxiety.
The Best Guitar Strings In San Diego
High on the list is “Am I too old to learn guitar in San Marcos ?I have been anxiously asked this question by a 28 year old student, a 38 year old, a 46 year old, and let’s see…off the top of my head, I can remember students at age 52, 65, 77, and finally, good old Frank who was 84! I have had plenty of experience with this question, and more importantly, with the answer
.I am going to tell you the answer right up front to set your mind at ease, just in case you are one of those guitar students desperately attempting to remain hopeful about your chances of success. Yes, anyone can learn to play the guitar at any age, period and any place in San Diego
One very common way of transitioning from one chord to another on the guitar is by means a "walk down".A walk down involves starting on the first chord, then playing a transitional chord, and then arriving at the destination chord.You have probably heard walk downs many times, possibly without even realizing it. But becoming aware of them, and learning how to perform some of the more common ones is essential to enhancing your guitar playing skills.A simple walk down is typically comprised of a three chord movement (original to transitional to destination), but others can be played as four or more chord movements.In a three chord movement, the transitional chord is one that is often just a one note variation on the original chord. For example, the bass note of the original chord may "walk down" a half or whole step in the transition.In another variation, a note higher in the chord formation may walk down while the bass note remains the same.This is what we will cover today using the "D" chord. In this walk down we will do a walk down starting on D (major), and arriving on D7 at the end.The transitional chord in this example will be a Dmaj7.Here is the TAB for the walk down:E------2-----2-----2-----B------3-----2-----1-----G------2-----2-----2-----D------0-----0-----0-----A--------------------------E--------------------------Notice that only one note changes throughout the walk down, the notes on the 2nd string. Just looking at that string you will see that in the first chord (D major), it starts on the 3rd fret, then in the transitional chord (D maj7), it moves to the 2nd fret, then on the destination chord (D7), it winds up on the 1st fret.The trickiest part about this walk down is that the fingering will change completely for each of the three chords.In the first, you will use a standard D chord formation - open 4th string, 1st finger on the 2nd fret of the 3rd string, 3rd finger on the 3rd fret of the 2nd string, and 2nd finger on the 2nd fret of the 1st string.Then in the transitional chord - continue to play the open 4th string, then just barre the 1st, 2nd and 3rd strings with the 1st finger.Finally on the D7 - Play the open 4th string again, place the 2nd finger on the 2nd fret of the 3rd string, the 1st finger on the 1st fret of the 2nd string, and the 3rd finger on the 3rd fret of the 1st string.Overall, this is a fairly simple, and common walk down. Practice it slowly to begin with until you are comfortable with the changes. Once you have it down, be sure to incorporate into your playing whenever you can.
Did you know that when you picked up your acoustic guitar, you're picking up an instrument with 5,000 years of history attached to it? Acoustic guitars are descendants of stringed instruments that were found in a variety of cultures thousands and thousands of years ago. As civilizations merged and the world became smaller, the guitar began taking on a unified shape and style. Since then, there has been a lineal evolution of several hundreds of years of instruments that can be directly compared to today's acoustic guitars.The Medieval PeriodDuring the Medieval Period of European history, there were several different forms of guitars. These guitars had between three and five strings and were much smaller than the guitars we know today. There were variations of these instruments which had pairs of strings, known as courses. The popular guitars of this period were commonly separated into two groupings. The first, the Guitarra Latina was likely developed from Spain, while the Guitarra Morisca was brought to Spain by the Moorish culture.The Renaissance and BeyondWhile in the Middle Ages, the guitar instruments were not terribly popular, being overshadowed by other contemporary instruments, in the Renaissance the guitar began to take a real hold. It was in Italy in 1779 that the first six string guitar was created. Gaetano Vinaccia created this instrument in Naples. Following that, the man known as the "Father of Modern Guitar" made his permanent mark on the course of the guitar and how it would be designed and played.Antonio de Torres Jurado made many key changes that in essence from the creation of what is known today as the modern classical guitar. Among these changes were the design elements that are recognizable as an acoustic or classical guitar today. The body was made larger and wider to help make sound travel farther and be louder, while the construction was also sturdier, more complete and more technically savvy.The Acoustic GuitarThe instrument that Antonio de Torres created and made popular was the Classical guitar. The acoustic guitar is commonly misinterpreted as being the same as the Classical guitar. This is not true, there are many key differences in the design of these two separate guitars. The most important of which is that the acoustic guitar has steel strings, while the Classical guitar is strung with nylon strings.The body was also made larger and sturdier still. The acoustic guitar was much better for performing in larger areas as it was increasingly louder than the Classical guitar; the two guitars also produce different ranges and textures of sounds which various styles of music correspond to.The acoustic guitar was actually developed in America from European immigrants. The last major development of the acoustic guitar is the electrical-acoustic guitar. These acoustic guitars can be plugged into an amplifier for increased volume or can be left unplugged and played as is.So next time you pick up an acoustic guitar, remember the history you hold in your hands.
The main purpose of setting guitar action is to get maximum playability and sound quality out of that instrument. If you do not feel comfortable while playing on your guitar or if it is making buzzing sounds, it needs action adjustments or setup. If you prefer to do the setup yourself, you may require tools like screwdrivers, wire cutters, feeler gauges, nut files, and Allen or Hex keys.The main adjustments for setting guitar action include the following:Truss Rod Adjustment: This is a metal object that runs along the length f the guitar. The main job of this part is to counter the tension of the strings and to control the neck curvature. Check truss rod if your instrument shows the tendency to buzz when playing low positions. You can adjust truss rod by turning the truss rod nut with help of an automotive feeler gauge and a Cap. Adjustment of this part cannot change the action, but it can avoid buzzing noises. This is a very delicate job and you should be careful not to break anything while adjusting it.Nut Height Adjustment: If you find it very difficult to play chords and notes on the first few frets, it indicates that the nut slots are not deep enough. Use a nut file or needle file to deepen the nut slots. If they are too deep, it will cause buzzing sounds. Raise the slots by placing a shim under the nut or replace the nuts.Saddle Adjustment: Adjusting the action or height of the strings can have great impact on the playability of the instrument. If you want to lower the action, after removing the strings, take the saddle out. Draw a line on it to mark your preferred height. Rub the saddle on the sandpaper to reduce its height. If you need to higher the action, place a shim under the saddle to raise the height of strings.Intonation Adjustment: Intonate your guitar after any adjustment is made. This can be done with help of a tuner, cable, and screwdriver. After tuning with a tuner, play a harmonic note at the 12th fret. Then, make a fretted note at the 12th fret and compare its pitch with that of the harmonic note. If the pitch of the fretted note is sharp, you have to raise the height of the strings and move the saddle away from the neck using saddle adjustment screws. If the pitch is flat, you should shorten the screws by shifting the saddle towards the neck.
Continue reading CA-San Marcos Guitar Tuner