CA-Santee Buy Guitar

In the 40 years that I have been teaching all styles of guitar to every type of student, there have been a few questions that come up over and over which seem to be the cause of great concern and anxiety.

The Best Learn To Play Guitar In San Diego 

High on the list is “Am I too old to learn guitar in Santee ?I have been anxiously asked this question by a 28 year old student, a 38 year old, a 46 year old, and let’s see…off the top of my head, I can remember students at age 52, 65, 77, and finally, good old Frank who was 84! I have had plenty of experience with this question, and more importantly, with the answer

.I am going to tell you the answer right up front to set your mind at ease, just in case you are one of those guitar students desperately attempting to remain hopeful about your chances of success. Yes, anyone can learn to play the guitar at any age, period and any place in San Diego

Guitar - Am I Too Old to Learn?

online guitar price in india Jump to navigation Jump to search Example of a cedar top flamenco guitar with traditional tap plates/golpeadores installed A flamenco guitar is a guitar similar to a classical guitar but with thinner tops and less internal bracing. It is used in toque, the guitar-playing part of the art of flamenco. Traditionally, luthiers made guitars to sell at a wide ranges of prices, largely based on the materials used and the amount of decorations, to cater to the popularity of the instrument across all classes of people in Spain.[1] The cheapest guitars were often simple, basic instruments made from the less expensive woods such as cypress. Antonio de Torres, one of the most renowned luthiers, did not differentiate between flamenco and classical guitars. Only after Andrés Segovia and others popularized classical guitar music, did this distinction emerge.[2] The traditional flamenco guitar is made of Spanish cypress, sycamore, or rosewood for the back and sides, and spruce for the top. This (in the case of cypress and sycamore) accounts for its characteristic body color. Flamenco guitars are built lighter with thinner tops than classical guitars, which produces a "brighter" and more percussive sound quality. Builders also use less internal bracing to keep the top more percussively resonant. The top is typically made of either spruce or cedar, though other tone woods are used today. Volume has traditionally been very important for flamenco guitarists, as they must be heard over the sound of the dancers’ nailed shoes. To increase volume, harder woods, such as rosewood, can be used for the back and sides, with softer woods for the top. In contrast to the classical guitar, the flamenco is often equipped with a tap plate (a golpeador), commonly made of plastic, similar to a pickguard, whose function is to protect the body of the guitar from the rhythmic finger taps, or golpes. Originally, all guitars were made with wooden tuning pegs, that pass straight through the headstock, similar to those found on a lute, a violin or oud, as opposed to the modern classical-style guitars' geared tuning mechanisms. "Flamenco negra" guitars are called "negra" after the darker of the harder woods used in their construction, similar materials to those of high-end classical guitars, such as rosewood or other dense tone woods. The harder materials increase volume and tonal range. A typical cypress flamenco guitar produces more treble and louder percussion than the more sonorous negra. These guitars strive to capture some of the sustain achieved by concert caliber classical guitars while retaining the volume and attack associated with flamenco. Classical guitars are generally made with spruce or cedar tops and rosewood or mahogany backs and sides to enhance sustain. Flamenco guitars are generally made with spruce tops and cypress or sycamore for the backs and sides to enhance volume and emphasize the attack of the note. Nevertheless, other types of wood may be used for the back and sides, like rosewood, maple, koa, satinwood and caviuna. A well-made flamenco guitar responds quickly, and typically has less sustain than a classical. This is desirable, since the flurry of notes that a good flamenco player can produce might sound muddy on a guitar with a big, lush, sustaining sound. The flamenco guitar’s sound is often described as percussive; it tends to be brighter, drier and more austere than a classical guitar. Some jazz and Latin guitarists like this punchy tonality, and some players have even discovered that these guitars’ wide-ranging sound also works well for the contrapuntal voicings of Renaissance and Baroque music. Flamenco guitarist Paco de Lucía Flamenco is played somewhat differently from classical guitar. Players use different posture, strumming patterns, and techniques. Flamenco guitarists are known as tocaores (from an Andalusian pronunciation of tocadores, "players") and flamenco guitar technique is known as toque. Flamenco players tend to play the guitar between the sound hole and the bridge, but as closely as possible to the bridge, to produce a harsher, rasping sound quality. Unlike classical tirando, where the strings are pulled parallel to the soundboard, in flamenco apoyando strings are struck towards the soundboard in such way that the striking finger is caught and supported by the next string, hence the name apoyando (from Spanish apoyar meaning "to support"). At times, this style of playing causes the vibrating string to gently touch the frets along its length, causing a more percussive sound.[3] While a classical guitarist supports the guitar on the right leg, and holds it at an incline, flamenco guitarists usually cross their legs and support the guitar on whichever leg is on top, placing the neck of the guitar nearly parallel to the floor. The different position accommodates the different playing techniques. Many of the tremolo, golpe, and rasgueado techniques are easier and more relaxed if the upper right arm is supported at the elbow by the body of the guitar rather than by the forearm as in classical guitar. Nonetheless, some flamenco guitarists use classical position. Flamenco is commonly played using a cejilla (capo) which raises the pitch and causes the guitar to sound sharper and more percussive. However, the main purpose in using a cejilla is to change the key of the guitar to match the singer’s vocal range. Because Flamenco is an improvisational musical form that uses common structures and chord sequences, the capo makes it easier for players who have never played together before to do so. Rather than transcribe to another key each time the singer changes, the player can move the capo and use the same chord positions. Flamenco uses a lot of highly modified and open chord forms to create a solid drone effect and leave at least one finger free to add melodic notes and movement. Very little traditional Flamenco music is written, but is mostly passed on hand to hand. Books, however are becoming more available. Both accompaniment and solo flamenco guitar are based as much on modal as tonal harmonies; most often, both are combined. In addition to the techniques common to classical guitar, flamenco guitar technique is uniquely characterized by: Flamenco guitar employs a vast array of percussive and rhythmic techniques that give the music its characteristic feel. Often, eighth note triplets are mixed with sixteenth note runs in a single bar. Even swung notes are commonly mixed with straight notes, and golpes are employed with the compas of different types of rhythms (i.e. bulerias, soleas, etc.) as is strumming with the strings damped for long passages or single notes. More broadly, in terms of general style and ability, one speaks of:

Vintage Guitar Values - How Much Is Your Guitar Worth?

teach yourself to play guitar Many of the visitors to my website ask about vintage guitar values. Do you have a guitar about which you would like to have information? Do you have a question about Fender guitar value, Gibson guitar value, or maybe the value of a Martin guitar? Even if you don't know what kind of guitar you have, a little research will help you to find the value of your guitar.What makes a guitar valuable?Several factors figure into the value of a guitar. In general, the guitar must be one which is sought after by collectors and musicians. The demand for a guitar is determined in general by quality, beauty, and playability. This demand must outweigh the available supply.Age is an important factor in the value of a guitar, but a guitar is not necessarily more valuable just because it is older. It must have been made with a high standard of quality in the first place. An old mediocre quality guitar is just that--an old mediocre guitar! The actual year that a guitar was made may not be as important as the PERIOD in which it was made.For example, electric guitars which are most valuable today include Fender Telecasters made before 1954, Fender Stratocasters made between 1954 and 1959, and Gibson Les Pauls made between 1958 and 1960. Acoustic guitars of the greatest value include Pre-World War II Martins and Gibsons.This is not to say that other guitars are not valuable. Many vintage guitars will bring a good price. The trick is to know approximately how much YOUR guitar is worth.How Do I Determine the Value of My Guitar?In order for you or anyone else to determine the value of your guitar, you must have certain information available. Ideally, you would know the brand, model, and serial number. The brand and model, however, can often be determined through the serial number. Then you must determine the condition of your guitar--prices differ greatly according to condition. Here are some guidelines: (these guidelines are from the "Blue Book of Acoustic and Electric Guitars")100% - New - New with all factory materials, including warranty card, owner's manual, case, and other items that were originally included by the manufacturer. On currently manufactured instruments, the 100% price refers to an instrument not previously sold at retail. Even if a new instrument has been played only twice and traded in a week later, it no longer qualifies at 100%.Excellent - this Excellent condition range is represented by both High Excellent and Low Excellent condition. High Excellent refers to an instrument that is very clean, looks almost new (perhaps a few light scratches/dings only), and has hardly been used. Low Excellent refers to a guitar that has been played/used, and has accumulated some minor wear in the form of light scratches, dings, small chips, etc. The older an instrument, the less likely it will be in High Excellent condition Even Low Excellent is seldom encountered on instruments over 50 years old, since most acoustic instruments were originally purchased to be playedAverage - The Average guitar condition factor indicates an acoustic guitar that has been in a player's hands and has worn due to player use (hopefully, no abuse). High Average condition instruments have normal dents, small chips, and light dings on the body, and/or scratches on the top and back. However, there should be no problems unless indicated separately. Low Average condition instruments may reflect major finish problems, replacement parts, previous repairs (especially on older instruments), alterations, and neck/fret wear is typically visible.Once you have this information at hand, you can attempt to find the value of the guitar by consulting various sources on the internet or you can have it appraised by an expert. Researching the value of your guitar on the internet may be free. The downside is that this research requires a big expenditure of time and a wide knowledge of guitar pricing resources. If you have your guitar appraised, remember that the appraiser may also be a dealer who is, after all, wanting to make a profit by reselling the guitar. For this reason, the appraisal MAY be biased.Because so many of my website visitors have inquired about the value of their guitars, I have begun to offer a GENERAL guitar evaluation service. This service is FREE. If you are interested, please visit:Vintage Guitar Values at the May Music Studio Website.

Guitar Amplifier

classical guitar lessons The main purpose of setting guitar action is to get maximum playability and sound quality out of that instrument. If you do not feel comfortable while playing on your guitar or if it is making buzzing sounds, it needs action adjustments or setup. If you prefer to do the setup yourself, you may require tools like screwdrivers, wire cutters, feeler gauges, nut files, and Allen or Hex keys.The main adjustments for setting guitar action include the following:Truss Rod Adjustment: This is a metal object that runs along the length f the guitar. The main job of this part is to counter the tension of the strings and to control the neck curvature. Check truss rod if your instrument shows the tendency to buzz when playing low positions. You can adjust truss rod by turning the truss rod nut with help of an automotive feeler gauge and a Cap. Adjustment of this part cannot change the action, but it can avoid buzzing noises. This is a very delicate job and you should be careful not to break anything while adjusting it.Nut Height Adjustment: If you find it very difficult to play chords and notes on the first few frets, it indicates that the nut slots are not deep enough. Use a nut file or needle file to deepen the nut slots. If they are too deep, it will cause buzzing sounds. Raise the slots by placing a shim under the nut or replace the nuts.Saddle Adjustment: Adjusting the action or height of the strings can have great impact on the playability of the instrument. If you want to lower the action, after removing the strings, take the saddle out. Draw a line on it to mark your preferred height. Rub the saddle on the sandpaper to reduce its height. If you need to higher the action, place a shim under the saddle to raise the height of strings.Intonation Adjustment: Intonate your guitar after any adjustment is made. This can be done with help of a tuner, cable, and screwdriver. After tuning with a tuner, play a harmonic note at the 12th fret. Then, make a fretted note at the 12th fret and compare its pitch with that of the harmonic note. If the pitch of the fretted note is sharp, you have to raise the height of the strings and move the saddle away from the neck using saddle adjustment screws. If the pitch is flat, you should shorten the screws by shifting the saddle towards the neck.

Continue reading CA-Santee Buy Guitar