In the 40 years that I have been teaching all styles of guitar to every type of student, there have been a few questions that come up over and over which seem to be the cause of great concern and anxiety.
The Best Epiphone In San Diego
High on the list is “Am I too old to learn guitar in El Cajon ?I have been anxiously asked this question by a 28 year old student, a 38 year old, a 46 year old, and let’s see…off the top of my head, I can remember students at age 52, 65, 77, and finally, good old Frank who was 84! I have had plenty of experience with this question, and more importantly, with the answer
.I am going to tell you the answer right up front to set your mind at ease, just in case you are one of those guitar students desperately attempting to remain hopeful about your chances of success. Yes, anyone can learn to play the guitar at any age, period and any place in San Diego
Jump to navigation Jump to search Example of a cedar top flamenco guitar with traditional tap plates/golpeadores installed A flamenco guitar is a guitar similar to a classical guitar but with thinner tops and less internal bracing. It is used in toque, the guitar-playing part of the art of flamenco. Traditionally, luthiers made guitars to sell at a wide ranges of prices, largely based on the materials used and the amount of decorations, to cater to the popularity of the instrument across all classes of people in Spain. The cheapest guitars were often simple, basic instruments made from the less expensive woods such as cypress. Antonio de Torres, one of the most renowned luthiers, did not differentiate between flamenco and classical guitars. Only after Andrés Segovia and others popularized classical guitar music, did this distinction emerge. The traditional flamenco guitar is made of Spanish cypress, sycamore, or rosewood for the back and sides, and spruce for the top. This (in the case of cypress and sycamore) accounts for its characteristic body color. Flamenco guitars are built lighter with thinner tops than classical guitars, which produces a "brighter" and more percussive sound quality. Builders also use less internal bracing to keep the top more percussively resonant. The top is typically made of either spruce or cedar, though other tone woods are used today. Volume has traditionally been very important for flamenco guitarists, as they must be heard over the sound of the dancers’ nailed shoes. To increase volume, harder woods, such as rosewood, can be used for the back and sides, with softer woods for the top. In contrast to the classical guitar, the flamenco is often equipped with a tap plate (a golpeador), commonly made of plastic, similar to a pickguard, whose function is to protect the body of the guitar from the rhythmic finger taps, or golpes. Originally, all guitars were made with wooden tuning pegs, that pass straight through the headstock, similar to those found on a lute, a violin or oud, as opposed to the modern classical-style guitars' geared tuning mechanisms. "Flamenco negra" guitars are called "negra" after the darker of the harder woods used in their construction, similar materials to those of high-end classical guitars, such as rosewood or other dense tone woods. The harder materials increase volume and tonal range. A typical cypress flamenco guitar produces more treble and louder percussion than the more sonorous negra. These guitars strive to capture some of the sustain achieved by concert caliber classical guitars while retaining the volume and attack associated with flamenco. Classical guitars are generally made with spruce or cedar tops and rosewood or mahogany backs and sides to enhance sustain. Flamenco guitars are generally made with spruce tops and cypress or sycamore for the backs and sides to enhance volume and emphasize the attack of the note. Nevertheless, other types of wood may be used for the back and sides, like rosewood, maple, koa, satinwood and caviuna. A well-made flamenco guitar responds quickly, and typically has less sustain than a classical. This is desirable, since the flurry of notes that a good flamenco player can produce might sound muddy on a guitar with a big, lush, sustaining sound. The flamenco guitar’s sound is often described as percussive; it tends to be brighter, drier and more austere than a classical guitar. Some jazz and Latin guitarists like this punchy tonality, and some players have even discovered that these guitars’ wide-ranging sound also works well for the contrapuntal voicings of Renaissance and Baroque music. Flamenco guitarist Paco de Lucía Flamenco is played somewhat differently from classical guitar. Players use different posture, strumming patterns, and techniques. Flamenco guitarists are known as tocaores (from an Andalusian pronunciation of tocadores, "players") and flamenco guitar technique is known as toque. Flamenco players tend to play the guitar between the sound hole and the bridge, but as closely as possible to the bridge, to produce a harsher, rasping sound quality. Unlike classical tirando, where the strings are pulled parallel to the soundboard, in flamenco apoyando strings are struck towards the soundboard in such way that the striking finger is caught and supported by the next string, hence the name apoyando (from Spanish apoyar meaning "to support"). At times, this style of playing causes the vibrating string to gently touch the frets along its length, causing a more percussive sound. While a classical guitarist supports the guitar on the right leg, and holds it at an incline, flamenco guitarists usually cross their legs and support the guitar on whichever leg is on top, placing the neck of the guitar nearly parallel to the floor. The different position accommodates the different playing techniques. Many of the tremolo, golpe, and rasgueado techniques are easier and more relaxed if the upper right arm is supported at the elbow by the body of the guitar rather than by the forearm as in classical guitar. Nonetheless, some flamenco guitarists use classical position. Flamenco is commonly played using a cejilla (capo) which raises the pitch and causes the guitar to sound sharper and more percussive. However, the main purpose in using a cejilla is to change the key of the guitar to match the singer’s vocal range. Because Flamenco is an improvisational musical form that uses common structures and chord sequences, the capo makes it easier for players who have never played together before to do so. Rather than transcribe to another key each time the singer changes, the player can move the capo and use the same chord positions. Flamenco uses a lot of highly modified and open chord forms to create a solid drone effect and leave at least one finger free to add melodic notes and movement. Very little traditional Flamenco music is written, but is mostly passed on hand to hand. Books, however are becoming more available. Both accompaniment and solo flamenco guitar are based as much on modal as tonal harmonies; most often, both are combined. In addition to the techniques common to classical guitar, flamenco guitar technique is uniquely characterized by: Flamenco guitar employs a vast array of percussive and rhythmic techniques that give the music its characteristic feel. Often, eighth note triplets are mixed with sixteenth note runs in a single bar. Even swung notes are commonly mixed with straight notes, and golpes are employed with the compas of different types of rhythms (i.e. bulerias, soleas, etc.) as is strumming with the strings damped for long passages or single notes. More broadly, in terms of general style and ability, one speaks of:
Jump to navigation Jump to search The lap steel guitar is a type of steel guitar which is typically played with the instrument in a horizontal position on the performer’s lap or otherwise supported. The performer changes pitch by pressing a metal or glass bar against the strings as opposed to a traditional guitar where the performer's fingertips press the strings against frets. The bar placed against the strings is called a "steel" or "tone bar". There are three types of lap steel guitars: Freddie Roulette holding console or double-neck steel guitar. A lap steel guitar's strings are raised at both the nut and bridge ends of the fingerboard, typically to about half an inch. The strings are too high to contact the surface of the neck, so frets, if present, are only for reference and are often replaced by markers. Some lap steel guitars can be converted between lap and fretted playing, or are modified versions of conventional guitars—the only difference is usually string height. Round-necked resonator guitars set up for steel playing fall into this category. Instruments designed exclusively as lap steel guitars typically have modified necks that make fretted playing impossible. The hollow neck acoustic lap steel, developed by Chris Knutsen and popularized by Weissenborn, extends the body cavity behind the neck all the way to the head. The square-necked resonator guitar has a strengthened square profile neck, allowing heavier string gauges and/or higher tunings that would normally be considered impossible (or certainly ill-advised) on a conventional guitar. The electric lap steel guitar typically incorporates the entire neck into the solid body of the guitar, again providing extra strength to allow a greater variety of string gauges and tunings. Console steel guitars, typically with more than six strings and/or multiple necks, are rarely played in lap steel fashion (without their legs), but are often referred to as lap steel guitars by many makers and authorities. See table steel guitar. Kaki King performing on lap steel guitar. The lap steel guitar is typically placed on the player's lap, or on a stool in front of the seated player. When playing with stand-up musicians, such as in a bluegrass band, it has become an alternative for the player to also play standing up; supporting the guitar with a guitar strap around the neck, with the guitar suspended horizontally, resting against the stomach area; providing stage mobility, such as for mic accessibility for singing. Unlike a conventional guitar, the strings are not pressed to a fret when sounding a note; rather, the player holds a metal slide called steel (or tone bar) in the left hand, which is moved along the strings to change the instrument's pitch while the right hand plucks or picks the strings. This method of playing greatly restricts the number of chords available, so lap steel music often features melodies, a restricted set of harmonies (such as in blues), or another single part. David Gilmour playing lap steel guitar - 26 January 1977 The steel guitar, when played in Hawaiian, Country, Bluegrass, or Western Swing styles, is almost always plucked using a plastic thumbpick affixed to the right hand's thumb, and metal or plastic "fingerpicks" fitted to the first 2, 3, or even all 4 fingers of the right hand. This allows the player greater control when picking sets of notes on non-adjacent strings. Some Blues players, especially those who use a round-neck resonator guitar played upright, conventional-guitar-style, with a bottleneck or hollow metal slide on one left-hand finger, forgo the fingerpicks and thumbpicks, and use their bare fingers and thumb instead. On the other hand, a minority of Blues players, and many Rock players, use a conventional flatpick. Tut Taylor is one of the few Dobro players that use a flatpick. Ben Keith playing lap steel guitar + pedal steel guitarIt is widely reported that the lap steel guitar was invented by a man named Joseph Kekuku in 1885. It is said that, at the age of 7, Kekuku was walking along a railroad track and picked up a metal bolt, slid the metal along the strings of his guitar and was intrigued by the sound. He taught himself to play using this method with the back of a knife blade. Various other people have also been credited with the innovation. The instrument became a major fad in the United States during the 1920s and 1930s. The instrument became especially popular in Hawaii, as musicians played in tent-rep shows. It was electrified in the early 1930s, and in 1932 the first production electric guitar was introduced, the aluminum Ro-Pat-In (later Rickenbacker) A22 "Frying Pan" lap steel. This made the so-called "Hawaiian" guitar the first electric stringed instrument (just a few years before Les Paul and Charlie Christian modified their instruments and after the theremin was patented in 1928). The earliest documented performance with an electrically amplified guitar was in 1932, by Gage Brewer. The Wichita, Kansas-based musician had an electric Hawaiian A-25 (frypan, lap-steel) and a standard electric Spanish from George Beauchamp of Los Angeles, California. Brewer publicized his new instruments in an article in the Wichita Beacon of October 2, 1932 and through performances that month. The first electric instrument on a commercial recording was made and played in 1935 by Bob Dunn, a musician in Houston, Texas who played in the Western swing band Milton Brown and His Musical Brownies. Dunn owned a music store that bore his name in the Houston area. The lap steel, dobro and pedal steel guitar are associated most closely with Hawaiian music, country music and bluegrass, though some players have used them in rock music, jazz, blues, and other musical genres. The round neck, metal-bodied resonator guitar is used almost exclusively by blues, rock, or blues-rock musicians. Harmon Davis playing steel guitar The Lap steel guitar is not tuned in standard guitar tuning (E-A-D-G-B-E, low to high). Rather, it is usually tuned to an open chord, often an extended chord like a 6th, 7th, or 9th. (All tunings are shown low-to-high; that is, thickest string to thinnest, or 6th string to 1st string). The earliest Hawaiian lap steel tuning was A low bass, E A E A C# E. Blues and Rock players tend to favor one of two tuning families: open G/open A, or open D/open E. Open G is tuned D-G-D-G-B-D; open A raises each of those notes a whole-step (2 frets) to E-A-E-A-C♯-E. During the 1920s and 1930s, much of the sheet music written for lap steel utilized open A tuning as the de facto standard tuning for the instrument. Other tunings such as E7 ( B D E G# B E ), C#m (B D E G# C# E), and many other tunings were developed. Open D is tuned D-A-D-F♯-A-D, and open E is a whole-step higher: E-B-E-G♯-B-E. Joe Perry of Aerosmith uses Open E on his electric lap steel. David Lindley is another player who uses transposed variations of these tunings. Bluegrass and Country Dobro players using a square-neck instrument tend to favor an altered G tuning, often called "High-G", where the 6th string is tuned up to "G" instead of down to "D", and the 5th string is also tuned up, to B: G-B-D-G-B-D. They also sometimes raise it up to "High-A": A-C♯-E-A-C♯-E. These are examples of tunings possible on a lap steel that could cause serious damage if attempted on a round-neck resonator or standard guitar. Henry Kaleialoha Allen in his book uses a modified C6 tuning, with a B♭ in the bass: B♭-E-G-A-C-E. Jerry Byrd has a C6 variant with C# in the bass: C# E G A C E. Dobro players also generally use a set of strings with different gauges than those used on standard electric or acoustic guitars to help them to project more sound and to achieve their higher tunings. Many Western Swing lap steel players, and some Old-Time Country lap steel players, use a C6 tuning. There is no "standard" C6 tuning; one popular one is C-E-G-A-C-E. This tuning is a good one for learning Don Helms' lap steel melodies from old Hank Williams records, although Helms used a lap steel with legs (a "console steel"), with two necks having 8 strings each; Helms actually used an E13 tuning, which adds the 7th (D) and the 13th (C♯) to the E tuning, making it B-D-E-G♯-B-C♯-E-G♯, low to high. An extended C6/FMaj7 is used by Western Swing pedal steel guitarists on their 10-string pedal steels. This tuning, C-F-A-C-E-G-A-C-E-G, is difficult to achieve on the 6-string steel but a subset thereof is achieved as previously mentioned. A6 is a commonly used alternate for C6 and was used by greats such as Billy Hew Len, Leon McAuliffe, Herb Remington, etc. The E7 tuning is used by many players, especially those who begin learning with the Mel Bay Steel Guitar Method instructional books. The E7 tuning in those books is spelled either B0-D-E-G♯-B-E or with the 6th string lowered to the tonic E: E-D-E-G♯-B-E. Note the similarity of this second tuning to the open E tuning above: the only difference is the 5th string, which is lowered from the tonic E to the 7th note in the key of E, which is D. There are many other tunings used by players. Pedal Steel guitarists switching over to lap steel often bring over a modified version of the 10-string E9 tuning that is the standard for Country pedal steel; pedal steels, and a few non-pedal "console steels" actually have multiple necks, each in a different tuning, and very often on a pedal steel the 2 main necks will be in E9 and C6 tunings. As noted under the C6 tuning, an A6 tuning is also used. See the links below for a list of additional tunings.
Did you know that when you picked up your acoustic guitar, you're picking up an instrument with 5,000 years of history attached to it? Acoustic guitars are descendants of stringed instruments that were found in a variety of cultures thousands and thousands of years ago. As civilizations merged and the world became smaller, the guitar began taking on a unified shape and style. Since then, there has been a lineal evolution of several hundreds of years of instruments that can be directly compared to today's acoustic guitars.The Medieval PeriodDuring the Medieval Period of European history, there were several different forms of guitars. These guitars had between three and five strings and were much smaller than the guitars we know today. There were variations of these instruments which had pairs of strings, known as courses. The popular guitars of this period were commonly separated into two groupings. The first, the Guitarra Latina was likely developed from Spain, while the Guitarra Morisca was brought to Spain by the Moorish culture.The Renaissance and BeyondWhile in the Middle Ages, the guitar instruments were not terribly popular, being overshadowed by other contemporary instruments, in the Renaissance the guitar began to take a real hold. It was in Italy in 1779 that the first six string guitar was created. Gaetano Vinaccia created this instrument in Naples. Following that, the man known as the "Father of Modern Guitar" made his permanent mark on the course of the guitar and how it would be designed and played.Antonio de Torres Jurado made many key changes that in essence from the creation of what is known today as the modern classical guitar. Among these changes were the design elements that are recognizable as an acoustic or classical guitar today. The body was made larger and wider to help make sound travel farther and be louder, while the construction was also sturdier, more complete and more technically savvy.The Acoustic GuitarThe instrument that Antonio de Torres created and made popular was the Classical guitar. The acoustic guitar is commonly misinterpreted as being the same as the Classical guitar. This is not true, there are many key differences in the design of these two separate guitars. The most important of which is that the acoustic guitar has steel strings, while the Classical guitar is strung with nylon strings.The body was also made larger and sturdier still. The acoustic guitar was much better for performing in larger areas as it was increasingly louder than the Classical guitar; the two guitars also produce different ranges and textures of sounds which various styles of music correspond to.The acoustic guitar was actually developed in America from European immigrants. The last major development of the acoustic guitar is the electrical-acoustic guitar. These acoustic guitars can be plugged into an amplifier for increased volume or can be left unplugged and played as is.So next time you pick up an acoustic guitar, remember the history you hold in your hands.
Continue reading CA-El Cajon Acoustic Guitar Tuner